Many iPhone 5 users get pleasure from using multitasking option of their phone which needs two times pressing on iPhone Home button. This button cannot last for a long time. Now let us focus on main button. It requires the replacement occasionally and we’ll demonstrate to you how to replace iPhone 5 Home Button on your own.
We discovered these instructions and photos at ifixit.com and will probably be delighted to share the in depth guide with our readers. Save your valuable money by learning to replace the Home button without difficulty. Stick to these step by step directions and have a look at the pictures to ensure that you’re carrying out almost everything the correct way.
You May Also Like These
- Nano SIM Tray Confirms Nano SIM For The New iPhone 5 (IMAGES)
- Guide On Downgrading iOS 6 To iOS 5.1.1 For iPhone 4, iPhone 3GS & iPod Touch
- Here Is How To Install Google Maps On iOS 6 For iPhone & iPad (Easy Way)
- Step By Step Guide For Activating iPhone Without SIM Card In iOS 6
How To Replace iPhone 5 Home Button
Just before you get started to solve your iPhone 5 Home button be sure you are well prepared. You must have Pentalobe and the Phillips #00 screwdrivers, spudger, plastic tools for opening, a suction cup and a brand new iPhone 5 Home button.
Here arrives the walk-through on how to replace your iPhone home button without having any pain.
Step 1. It really is important to switch off the iPhone just before you are making any manipulations. Now open the Pentalobe 3.6 mm screws they may be located close to the Lightning connector by using the screwdrivers.
Step 2. Firmly place the suction cup to your iPhone’s display.
Step 3. Hold the iPhone with one hand and employ the other to pull-up the suction cup. Make sure you separate the front panel and rear case. Subsequently use the plastic opening tool to pry rear case and remove clips which are holding the front panel away.
Step 4. Carefully pull the iPhone panel’s bottom part off, turn the panel as it is demonstrated with image. Do not remove the front panel entirely for the reason that it is actually still connected to the back panel through cables.
Step 5. Utilize the screwdriver to take out 1.6 mm and 1.2 mm screws.
Step 6. Remove the cable bracket that is attached to the logic board and the front panel.
Step 7. Remove the LCD, Digitizer and the cables of front-facing camera by using an opening tool.
Step 8. Ultimately you are able to take the front panel away.
Step 9. The iPhone Home button is linked with the help of two 1.3 mm screws. Make sure you remove them.
Step 10. The bracket of button needs to be flipped to right.
Step 11. You will require the spudger to lift up the home button. Be soft with rubber that is all around it, do not rip this and change your old iPhone Home button with new one.